MULTISPEC COUNTERTOP INSTALL

If your fixture has been refinished before we will have to strip off the old finish.We also cover up the entire area with drop cloths and proper masking to ensure your home is protected. We will set up a high powered ventilationВ system to carry fumes to the outside.First we come in and remove any old caulking around the tub or fixture. Proper preparation is key to a long lasting finish.This will be discussed before we start any project.

MULTISPEC COUNTERTOP INSTALL

If you purchased new hardware we will install the new hardware at no additional charge as long as no new holes need to be drilled. We also reinstall any hardware that was removed. The final day, which is usually Friday, we come out and hang all the doors and drawer fronts.The smell is very minimal and it's safe for you to be home during the application. This process with primer and topcoat typically only takes a day. After everything is masked, covered, and ventilation set up we will spray the cabinet boxes/bases on site.Most cabinet bases are veneer not real wood, which doesn't require as much work as the doors. Cabinet boxes/bases will get cleaned during this time.

If any issues are found we sand and recoat. After the finish coat has dried we go through the doors to inspect them for any issues. Final step for the doors would be the finish coat.Doors typically get 2 coats of primer sanding in between coats.Next we sand followed with another solvent wipe.Excessive amounts of grease may incur an extra charge for cleaning) After cleaning we wipe the doors down with a industrial solvent to help remove any types of wax or contaminates the degreaser may have missed. (We ask everyone to please clean any heavy residue off of your cabinets before we arrive. The doors and drawers get cleaned with a degreaser to remove any residue.We come out day 1 and remove the doors and drawer fronts to work with off site.The process for a kitchen cabinet refinish will take on average 5 days. Our company strives for customer satisfaction which is why we don't skimp in our process. We take pride in each and every job and do very detailed work. The products we use are among the best in the industry, but even with good products if any steps in the process are overlooked the end result will be cracking, peeling, and a failed coating. The paint and materials we use are sold only to professionals and cannot be purchased in stores with all those other DIY refinishing kits. We use top of the line products that have been tested and proven not to fail under some of the worst conditions. When using MultiColor Paint on surfaces that will take physical and chemical abuse such as bathtubs, sinks, ceramic tile and countertops, MultiColor MUST be clear coated.Our process is by far the best in the industry. Spray 2 to 3 even coats of MultiColor over surface until look is s achieved. Primer surface with NuPrimer 1000 and let dry for 15-20 minutes before applying the NuStone MultiColor you are using, this in not required but helpful.

Tack down surface with tack cloth before primer is applied. Lightly sand surface with 220 grit sandpaper before primering. MultiColor paint is an affordable alternative to a granite look that is designed to be virtually odorless and durable for all surfaces including bathtubs, tile and countertops.ДЄpproximate coverage with one gallon of multispec: 120 - 150 SQFT

Multispec countertop